800 Rds FORT. BENNING
Bulldog Tactical Equipment's goal was to substantially increase the War-Fighters individual capability on the battlefield. The Bulldog AG Kit has utilized our Patented Technology to improve an existing system, which has provided a 15 Lb weight reduction from standard issue equipment and an efficiency that has dynamically multiplied an individual weapon systems lethality.
Rumors from end users say a single AG Kit has the ability to hold off up to a 1000 enemy combatants. Just imagine if the 240 and the Two SAWS were outfitted with the AG Kit.
Ambush scenarios, can now be viewed with an entirely new perspective! As was thoroughly tested at Fort Bragg / Camp Mackall
BULLDOG M240 AG Kit AMMO POUCHES
(2) 400 Round Pouches (800 RD) COMBINED CAPACITY!!!!
Designed for rapid ammunition access.
Ammo is fed through an aluminum tension apparatus, which eliminates the need for the ammo to be hand fed into the weapon.
The weapon can pull the ammo directly from the pouch without assistance from the Assistant Gunner.
When the rounds are broken, the tension from the bracket will hold the rounds in place!
MOLLE: All accessories are MOLLE compatible.
Exterior of the pouch is constructed with 1000D Cordura Nylon.
Stitching: Each pouch is stitched (3) times as well as bar tacked every 3 inches for maximum durability. 70 Lb Thread is used throughout.
Kydex reinforcement retains the pouches shape.
BULLDOG M240 AG KIT INCLUDES THE FOLLOWING:
1. (1) Bulldog Rail Frame
2. (1) Set of Shoulder Straps
3. (1) Waist Belt
4. (2) 400 Rd Ammo Bags: Molle Compatible, with an Aluminum Ammo Feed Bracket
5. (1) Spare Barrel Quiver: Thermal Line Spare Barrel Quiver
6. (1) Barrel Matt: Cooling Mat for the spare barrel
7. (1) M249 / M240 B Weapon Sling
8. (1) Accessory Pouch
9. (1) Hydration Pouch
10. (1) Heat Shield Mitt
11. (1) Jacket Pouch
12. (1) 2 Day Sustainment Pack
Bulldog Rail Frame
Rail: Re-Configurable, Accessory, Integrated, Load Carriage System:
The Pouches can be Mounted Vertically or Horizontally, Front or Rear. This Pack Frame is compatible with all Molle Pouches allowing for multiple pouch configurations. The Pack Frame has a Load capacity of 400 Lbs. The removable Platform can be used to carry Ammunition Cans, Mortars, Batteries, Water, or any other Bulky Items. Constructed from Aircraft Aluminum, which is CARC (Chemical Agent Resistant Coating) Coated. Any damage to the frame can be hammered back into place with a hammer!
Rail Frame Platform:
Equipment Platform designed to hold Ammo Cans, Batteries, Food, and Water. Included is a rapidly releasable securing strap.
Load Capacity 150 Lbs.
The waist belt is designed to accept molle compatible pouches with a taper towards the end allowing for ease of movement and access to Radios and M4 Pouches.
400 Rd Ammo Bags
Bulldogs Patented ammo bag is designed to contain 750 Rds of linked ammunition depending on how neatly the ammunition is placed into the bag. The pouch is secured with (4) Fast Tacks as well as a Velcro lid which will prevent any debris from arbitrarily entering the pouch. The Patented Ammunition Feed Bracket provides enough tension on the ammunition that even when inverted, ammunition will not fall from the bracket. Yet the tension provided by the bracket is light enough that the 240 can self-feed the ammunition from the pouch without aide from the Assistant Gunner. This system provides the soldier a unrepresented ability to sustain continuous rates of fire with minimal down time.
Spare Barrel Quiver
Thermal Lined Spare Barrel Quiver, will accommodate either a M 240 Spare Barrel or A M249 Saw Spare Barrel. Manufactured with the same Thermal Liner and Kevlar as your current issue M249/M240 B Spare Barrel Bag. Therefore a 800 degree barrel can be placed inside without damage to the equipment. The ability to replace individual components when they are ruined will reduce the cost of replacing only individual items that are damaged versus replacing a large cost item.
Spare Barrel Matt
Thermal Lined Spare Barrel Matt, will accommodate either a M 240 Spare Barrel or A M249 Saw Spare Barrel. Manufactured with the same Thermal Liner and Kevlar as your current issue M249/M240 B Spare Barrel Bag. Therefore a 800 degree barrel can be placed on top to cool without damaging to the equipment. The ability to replace individual components when they are ruined will reduce the cost of replacing only individual items that are damaged versus replacing a large cost item.
M249/M240 B Weapon Sling
The M240B/M249 Saw Weapon Sling is a heat resistant sling uniquely designed to prevent failure when the sling contacts the hot barrel of the machine gun.
Crafted with ½” closed cell foam for extra comfort
4” wide shoulder pad
1.5” wide mil-spec webbing
Stainless steel hardware and inner core
Stainless steel release clip for rapid weapon removal
Triple layered sheath
This is an Ultra-Light Weight zippered pouch designed to carry all the extra accessories need while deploying the mortar system.
Dimensions: 6 Wide x 3” Deep x 8.5” Tall
This is an Ultra-Light Weight Molle Compatible zippered pouch with a slit in the upper seam to allow for the Hydration Tube to be fed to his upper torso. This was specifically designed to carry a 100 Oz Hydration bladder. Due to the small size it was designed to be mounted to the plate carrier just behind your elbow. This placement on the Soldier prevents water from being pushed out when sitting in a Vehicle or Aircraft. Being attached to the soldier it prevents the hydration from being removed in an emergency. If not used for this purpose it makes an excellent multipurpose pouch.
Dimensions: 6 Wide x 3” Deep x 8.5” Tall
Heat Shield Mitt
The Heat Shield Mitt is designed to be used during hot barrel changing operations. Our mitt is designed to be quickly placed over any tactical glove, cold weather glove or bare hand and provide the gunner maximum protection while performing a hot barrel change.
Light weight, yet ruggedly constructed.
Heat resistant to 1800 Degrees.
The mitt’s thermal barrier provides the gunner maximum protection while changing out a hot barrel.
Jacket Cinch Pouch
Designed to Carry the Level 7 Puffy Jacket
500 Denier construction
2 Day Assault Pack
Designed to be mounted over the ammo bags
Dimensions 17 Tall x 12 Wide x 8 Deep
Hydration Compatible and can be used independently
Cubic Inches: 1700 Cubic Inches
Weight: 1 Lb 2 oz
Multiple zipper openings
Manufactured with 500 Denier Cordura
Bulldog Equipment invented the current issue M249/ M240 B Spare Barrel Bag, M249/ M240 B Weapon Sling, and the 240 Ammo Bag for the US Military. With our background in this weapon system the transition to this AG Kit was second nature. This ammunition deployment system can be used across the board with all belt fed machine guns in currently in inventory and weapons of the future.